Skeleton & Openworked Watches · Page 39

Up Close: Breguet Classique Tourbillon Extra-Plat Squelette 5395

In terms of press, Breguet’s most significant watch of the year is a relatively simple one, the Type 20 for Only Watch, which sold for 210,000 Swiss francs at the charity auction, or just over four times the high estimate. But the most significant watch in terms of haute horlogerie is the Classique Tourbillon Extra-Plat Squelette 5395. The ref. 5395 a large, thin, and ornate watch that’s actually a variant of the large, thin, and simple ref. 5367 introduced two years ago. More elaborate than the typical Breguet, the ref. 5395 is beautifully executed, down to the smallest elements, like the blued-gold hobnail hour markers or mirror-polished countersinks. But most importantly, the movement within is finished exceedingly well – by hand – to a level that’s a cut above the average Breguet complication. Most of that is obvious in the photos below. Graceful proportions At 41mm and just 7.7mm high – thinner than the 8.1mm Royal Oak “Jumbo” – the ref. 5395 sits elegant and flat on the wrist.  Compared to larger, and usually more complicated, Breguet watches, this feels like what a classical Breguet should be. Because of its diameter, however, it can look like a dinner plate on smaller wrists. And the ref. 5395 doesn’t work on hairy wrists either, because the skeletonisation leaves a wide gap in between the bridges. That’s because the skeletonisation of the cal. 581SQ inside is extreme; according to Breguet some 50% of the movement’s mass was removed. And th...

Auction Watch: Breguet Skeleton 30-Day, Constant Force Clock by Philippe René Jaccard

One of the most intriguing timepieces being offered in the final run of watch auctions for 2019 is not a wristwatch, but an incredibly rare table clock made by Breguet in 1934 that’s going under the hammer at Christie’s. It hardly looks like a typical Breguet – having no engine-turning or gilding or blued steel hands – but is remarkably striking, with a skeletonised, architectural movement that is modern-looking despite being 85 years old. Abraham-Louis Breguet is rightly regarded as one of the most important watchmakers in history, whose inventions range from the natural escapement to the tourbillon, while being commercially savvy enough to become a leading watchmaker to the Ottoman Empire. But his descendants ventured into other businesses by the mid 19th century, most notably aviation, so the watchmaking operation was sold by Louis-Clément Breguet, grandson of Abraham-Louis, in 1870 to English watchmaker Edward Brown. The Browns kept the workshop in Paris, though it moved several times over the decades. During the century that the Brown family ran Breguet – Brown’s grandson George sold the company to French jeweller Chaumet in 1969 – the firm mostly retained the signature Breguet style and produced a large variety of timepieces, but in tiny quantities, often relying on external specialists for movements and components. Timepiece no. 3142 This clock is one such timepiece from the period. A unique piece according to the accompanying Breguet museum archive...

Highlights: A Patek Philippe Trio at Phillips’ New York Auction

The final watch auctions of the year take place in New York, and as usual Phillips is staging a thematic sale. Titled Game Changers, the auction is made up of watches owned by game-changing celebrities like Marlon Brando and Jack Nicklaus, or timepieces that were game changers in the horological landscape, like the F.P. Journe Octa Reserve de Marche prototype. Also in the sale is a would-be game changer: the Vacheron Constantin Overseas prototype in titanium, not yet a game changer since it has not been put into production, but being the coolest Overseas to date, it probably will. And also worth a look is the vintage Heuer Monaco with a hand-finished movement that’s being sold for charity. But this article is about a handful of Patek Philippe watches, including the sale’s top lot, a ref. 1518 “pink on pink”, as well as a less expensive but more intriguing skeleton pocket watch with paillonnee enamel decoration. The ref. 899 pocket watch decorated with blue enamel and paillons Lot 38 – Patek Philippe ref. 530 chronograph The ref. 530 is a desirable model because it’s oversized for a vintage watch – the case is 36.5mm in diameter – giving it proportions that are quite modern. And the ref. 530 is rare, although a several examples have come up at recent auctions. They sold for moderate prices, for varying reasons and perhaps a general market softness, so this one might be a chance to land a ref. 530 for a reasonable price. This example is attractive. The dial ...

TAG Heuer Introduces the Carrera Heuer 02T Cortina Edition

Launched in 2016, the TAG Heuer Carrera Heuer 02T remains the most affordable Swiss-made chronograph with touribllon, starting at just US$17,000. Despite the price, the Calibre Heuer 02T is an in-house movement that’s automatic, COSC-certified, and equipped with a lightweight flying tourbillon that has a carbon composite upper carriage and titanium base. The latest variant of the affordable “grand” complication is a limited edition made for Singapore retailer Cortina Watch. Dressed in orange and back, the Carrera Heuer 02T Cortina Edition is being offered only online, via the retailer’s website. As with the standard model, the case measures 45mm wide and 16.4mm high. It features the modular construction that characterises the Carrera line. The case middle is black-coated titanium paired with a black ceramic bezel, while the lugs, pushers and crown are steel. The dial is semi-skeletonised to reveal the grey, sandblasted base plate of the movement. Orange accents are applied to the dial and bezel, including the chronograph hands, and even the carbon composite upper cage of the tourbillon, creating a striking contrast with the black components. Mechanically the movement is identical to the standard Heuer 02T. Based on the CH-80 chronograph movement, it’s equipped with a column wheel and vertical clutch for the chronograph. And it has a 65-hour power reserve, with the balance running at a frequency of 4Hz. Key facts and price TAG Heuer Carrera Heuer 02T Cortina Edi...

Ressence Introduces the Type 1DXB Dubai Edition

Created for Ahmed Seddiqi & Sons, the largest watch retailer in the Middle East, to mark Dubai Watch Week 2019, the Type 1DXB is an unusual twist on the typically minimalist Ressence design. Though the watch retains the brand’s signature orbital disc time display, the dial has been skeletonised in a geometric motif inspired by traditional patterns found in Arabic and Islamic culture. Unlike most watches made for the Middle East that sport Eastern Arabic numerals, this is is literally an Arabic dial. The dial is sand-coloured and finishes with a matte, granular surface, matched with white Super-Luminova. Visible through the dial are the gears that drive the unusual time display, all contained within a proprietary Ressence module sitting on top of an ETA 2892 base moment. The 41mm case is square in form, identical to that of the Type 1 Squared. But it is made of titanium, instead of steel as is standard for the Type 1 Squared. And as is standard for Ressence, time setting and winding is done via the case back, hence the lack of a crown. The Type 1DXB is limited to 19 watches, available only at Ahmed Seddiqi & Sons. Key facts and price Type 1DXB Case diameter: 41mm Height: 11mm Material: Titanium Water resistance: 10m Movement: ROCS 1 (base ETA 2892) Functions: Hours, minutes, seconds, day of the week Frequency: 28,800 (4Hz) Winding: Automatic Power reserve: 36 hours Strap: Calfskin with titanium buckle Limited edition: 19 pieces Availability: Only at Ahmed Sedd...

5 Skeleton Timepieces Revealing Mechanical Beauty For Only Watch 2019

Only Watch by Christie’s will be held in Geneva on November 9, 2019, and a surprisingly high number of skeleton watches are among the 50 unique pieces for sale. Skeletonizing is a technical and aesthetic art that allows for fascinating insights into the movements’ inner workings. Which pieces might you be interested in bidding on?

Hands-On: Audemars Piguet Code 11.59 Tourbillon Openworked “Only Watch”

At Only Watch 2017, Audemars Piguet’s Royal Oak Perpetual Calendar in black ceramic – but with a one-off blue dial – sold for a whopping 800,000 Swiss francs, with two phone bidders driving it to nearly seven times the high estimate. It was the third most expensive watch in the sale. This year’s contribution is no Royal Oak – far from it – but it’s surprisingly worthy of a second look. In fact, it’s probably the best-looking watch to emerge from the brand’s often criticised Code 11.59 line. Amidst the flak heaped upon it, the Code 11.59 range had a couple of standouts, including the Tourbillon Openworked. And that’s where AP started for Only Watch 2019. The Tourbillon Openworked Only Watch retains the slim, beautifully finished skeleton movement, eschewing the contentious Code 11.59 dial altogether. And the movement has a two-tone finish that smartly highlights the most important mechanical components. To match the movement, the Only Watch edition features a two-tone case that does justice to the Code 11.59 construction in a way the uniform colour of the standard models simply couldn’t. Superbly constructed In terms of size, the case is identical to the standard model – 41mm by 10.7mm. Beyond immediate impressions, the case is wonderfully constructed with a subtle and intriguing mix of shapes and finishing made obvious by the two-tone materials. The octagonal case middle is pink gold, while the rest of the case, including the lugs, are white gold,...

Watchscapes and wear impressions: Bell & Ross BR 05 Skeleton

We reviewed the new Bell & Ross BR 05 earlier. And now give you wallpapers of the BR 05 Skeleton version, and our further thoughts..

Trick or treat with the Zenith Defy Classic Skeleton

Editor’s note: One of my main criteria for a banger watch these days is wearability. Sure, looks are important, but fit reigns supreme. Luckily, the Zenith Defy Classic Skeleton delivers on both fronts …  The story in a second:  Contemporary design and classic size make this a winning combination. It’s no secret that the Defy … ContinuedThe post Trick or treat with the Zenith Defy Classic Skeleton appeared first on Time+Tide Watches.

RJ Introduces the Arraw Spider-Man Tourbillon

Though RJ has long used pop culture icons – from Hello Kitty to Pokemon to Super Mario – on its watches, the Arraw Spider-Man Tourbillon is the most interesting to date, because it’s powered by a newly developed movement boasting a central flying tourbillon and a six-day power reserve. While earlier RJ cartoon- or comic-inspired were mostly standard watches with design tweaks, the new tourbillon modelled on Marvel’s web-slinger is mechanically interesting on several levels. The Arraw Spider-Man Tourbillon is powered by the RJ-7000, a hand-wound movement that, according to the brand, was developed in-house at its recently opened manufacture in Eysins, about 30 minutes from downtown Geneva. More notably is the fact that the concept of the movement was first developed by RJ chief executive Marco Tedeschi while he was studying micro-technical engineering at the École Technique de la Vallée de Joux (ETVJ). Central tourbillon The movement is fully skeletonised, with the large flying tourbillon sitting right in the centre. Though conventional tourbillons are extremely common, central tourbillons are notably uncommon. Only a few brands produce them, most notably Omega and Beat Haldimann, and now RJ. Open-worked to resemble a spider’s web, the tourbillon cage is made of titanium, and sits just over a pair of eyes taken from Spider-Man’s mask. Because the tourbillon sits right in the centre of the dial, the hands are are peripheral, sitting on the edge of the dial, b...

Hands-On: Bell & Ross BR 05 Skeleton

Demand for the luxury sports watches that were born in the 1970s – all with integrated bracelets and designed by Gerald Genta – is now red hot. That has fuelled the development of such watches from every corner the industry, from Chopard to Urban Jurgensen to Bell & Ross (B&R). While many of these watches have sparked criticism for their derivative design, B&R’s entry into the genre comes with a distinct price advantage. The BR 05 is probably the most reasonably priced watch in this design category, starting at under US$5000. No doubt it owes a great debt to Genta’s designs, but it would be futile to compare it with the alternatives given the price gulf. But the standard BR 05 is a pretty conventional watch – well done for the price but not something that jumps out at you. The BR 05 Skeleton, on the other hand, is striking, with a look and feel that is distinct – priced at about 20% more than the base model. Well dressed Like all watches in its category, the BR 05 is largely all about the case and bracelet. The BR 05 Skeleton is identical to the base model on the outside, with a rounded-square case and a bezel with visible screws at its corners. While it is appears to be a mishmash of Genta’s classics, it bears a strong enough resemblance to the brand’s signature BR 01 and BR 03 cases – which were inspired by aircraft instrument panels – that it can pass as a rather natural evolution. But in contrast to the BR 01 and BR 03, the BR 05 ha...

Introducing the Audemars Piguet Royal Oak Perpetual Calendar Openworked Black Ceramic

INTRODUCING: The Audemars Piguet Royal Oak Perpetual Calendar Openworked

Audemars Piguet have once again stunned everyone with their latest full-ceramic piece of timekeeping wonderment – the Audemars Piguet Royal Oak Perpetual Calendar Openworked. Showcasing the Swiss marque’s ceramic prowess, the Royal Oak Perpetual Calendar’s 41mm black ceramic case and conforming bracelet are finished to exquisite detail, and feature both brushed and polished elements. And … ContinuedThe post INTRODUCING: The Audemars Piguet Royal Oak Perpetual Calendar Openworked appeared first on Time+Tide Watches.

Introducing: The Audemars Piguet Royal Oak Perpetual Calendar Openworked In Black Ceramic

One of the hottest watches on the planet just got even hotter.

Up Close: Audemars Piguet Royal Oak Perpetual Calendar Openworked in Black Ceramic

The last time Audemars Piguet had a skeletonised Royal Oak perpetual calendar in the catalogue, it was 2015. The skeleton perpetual is familiar enough that it doesn’t seem to have been missing for that long, but it’s been a half-decade. In the mean time, Audemars Piguet (AP) unveiled the next generation of Royal Oak Perpetual Calendar, with the case widened to 41mm, and then introduced it in black ceramic, and only just, in white ceramic. And it took some time to develop the thinnest automatic perpetual calendar ever. But now the Royal Oak Perpetual Calendar Openworked is back, in proper, fine form. Putting a skeleton movement inside the bestselling Royal Oak in black ceramic is obvious, and could have been done in the easiest way possible. But AP went one better; it developed a new calibre, the 5135, that is not merely open-worked, but also redesigned for maximum aesthetic effect. “This is the first time in many years that AP has introduced an openworked perpetual calendar wristwatch,” says Michael Friedman, the head of complications at AP, “The effort here was to create an experience of contrast and play of light.” I’d say AP succeeded. The watch pictured is a travelling prototype, so pardon the cleanliness of the movement Ceramic and the Royal Oak But first, a small, modestly technical digression on the material and the watch. The case and bracelet are made of black ceramic, specifically zirconium oxide stabilised with yttrium oxide – essential for...

White light - the Zenith Defy Classic in white ceramic

Editor’s note: Who knew that a fully white ceramic open-worked watch would be one of this year’s freshest looks? No one, that’s who. But that’s OK, a surprise hit wouldn’t be a surprise if everyone saw it coming. Which is somewhat ironic as everyone will see you coming if you’re rocking this bad girl on … ContinuedThe post White light – the Zenith Defy Classic in white ceramic appeared first on Time+Tide Watches.

The Franck Muller Vanguard Yachting Anchor Skeleton

Artisanal watchmakers Franck Muller have really taken it to the next level with their latest timepiece, the Franck Muller Vanguard Yachting Anchor Skeleton. Available in a range of different precious metals, including 18k yellow gold and 18k rose gold, the case of the prodigious new wristwatch measures an imposing 44mm and is 12.65mm thick. Housed … ContinuedThe post The Franck Muller Vanguard Yachting Anchor Skeleton appeared first on Time+Tide Watches.

Bulgari is well placed to clean up at the GPHG, thanks to these 5 watches

There’s no doubt that Bulgari like the GPHG. In 2017 they won the men’s category for their Octo Finissimo Automatic and the Tourbillon prize for the Finissimo Skeleton. A few years earlier, in 2014, they took home the Jewellery prize for their Diva High Jewellery Emeralds. Their odds are looking strong for the 2019 edition of … ContinuedThe post Bulgari is well placed to clean up at the GPHG, thanks to these 5 watches appeared first on Time+Tide Watches.

Cyrus Klepcys Vertical Tourbillon: ‘Artificial Gravity’ On The Wrist

The concepts of the Cyrus Klepcys Vertical Tourbillon and Vertical Tourbillon Skeleton rotate around a vertically oriented tourbillon in the center of the movement. Joshua Munchow sees an awesome spaceship with an artificial gravity ring in the center; how about you?

Hands-On: Bell & Ross BR-X1 Phantom Chronograph

In 2014, Bell & Ross’ signature BR 01 design spawned a futuristic, ultra-graphic spin-off that would take the brand miles beyond the cockpit – the BR-X1. While the watch inherited the distinctive circle-within-a-square case modelled on aircraft instruments, from there the execution swerves radically away from the retro-military look of the original, with the BR-X1 taking on a greater complexity in both construction and style. Iterated into numerous variants in the five years since its launch – including a Renault Formula 1 edition and White Hawk – the BR-X1 is characterised by open-worked dial revealing a skeletonised chronograph module and a complex case made up of a combination of materials – here titanium and ceramic – with rocker-style pushers pivoted on one end. This year, Bell & Ross (B&R) has unveiled one of the most striking iterations of the BR-X1 to date, the all-black Phantom. The BR-X1 Phantom Going dark Watches with black cases and dials are relatively common today, ironically thanks in part to one brand that resisted the genre so vehemently that it spawned an outlaw cult of aftermarket all-black watches. Even with the flood of black watches on the market, few have gone above and beyond in making everything on the watch black. The first truly all-black watch was the smash hit Hublot Big Bang of 2006, which was followed by hordes more. But the greatest irony of such watches is that the illegible colour palette results in an eminent...

RECOMMENDED READING: Is this the perfect Patek Philippe?

Patek Philippe are not known for hi-tech carbon composite case materials, skeleton dials, or really any enthusiastic contemporary flair. What they are known for is being the priest of the Temple of Classicism, considered and purposeful in any direction of development, refusing to bend to ephemeral market tastes. The clearest way this can be seen … ContinuedThe post RECOMMENDED READING: Is this the perfect Patek Philippe? appeared first on Time+Tide Watches.

Roger Dubuis, Franck Muller, Louis Moinet Unveil Watches for Singapore Charity

As has become a tradition for Singapore children’s charity Kidz Horizon Appeal, its annual fundraising dinner will include an auction of one of a kind watches created especially for the event. Past auctions included timepieces by Audemars Piguet, Greubel Forsey, Vacheron Constantin and Voutilainen. This year’s line-up is made up of three watches from Roger Dubuis, Franck Muller, and Louis Moinet, the proceeds from which will go to the charity that funds medical treatment for children from poor families. Inspired by the colours of the Greek island, the Franck Muller Vanguard Mykonos (also pictured above) is the first watch from a limited edition of 28 made for the brand’s retailer Sincere Watch, which donated the watch to Kidz Horizon. It’s a variant of Frank Muller’s popular sports watch, with a polished steel case that has an integrated strap and a white resin insert running lengthwise along its side. Inside is the FM 0800, an automatic ETA movement.  Vanguard Mykonos Commissioned by an anonymous donor, Roger Dubuis put together the Excalibur Huracàn “Kidz Horizon”, based on the wristwatch inspired by Lamborghini’s V10 coupe. Ordinarily available only with a titanium case, the Kidz Horizon edition has a case made from a combination of lightweight materials: titanium for the bezel and back, and a skeletonised case middle in C-SMC carbon – the same carbon composite used in the Huracan. The red accents on the dial and bezel are also unique to ...

Review: Bell & Ross BR-X1 Phantom

Bell & Ross revives the BR-X1 skeleton and provides an opportunity for those who fancy the watch a chance to own this piece. Here is the BR-X1 Phantom.

Hands-On: The Cartier Santos De Cartier Skeleton ADLC Noctambule

A fully lumed modern skeleton matched with a stealth black case