Kurono Tokyo has a new chronograph, and it's a different kind of Kurono. The Structure Chronograph S1 trades the brand's art deco dress style for something sportier: a 40mm steel case, a white rubber strap and a dial designed purely around reading the time quickly. Hajime Asaoka asked himself how a chronograph should look if it were a true tool watch. This is his answer.
Asaoka is one of Japan's best-known independent watchmakers, and his own handmade pieces are rare and expensive. Kurono Tokyo, which he started in 2019, is how he brings his designs to more people, using Japanese-made mechanical movements. The brand has done chronographs before, but those were 38mm and much more classical. The S1 goes up to 40mm and leans clearly into sports watch territory.
A dial built in four layers
The "Structure" in the name is easy to understand once you look at the dial. It's made of four levels: a black minute track on the raised outer edge, a white chapter ring, two sunken counters with a snailed finish, and a textured centre in teal, white or salmon. The point of all that stacking is to keep each hand as close as possible to the markers it points at. Kurono says the chronograph hand has almost zero parallax against the indices, so you read what you see, even from an angle.
There isn't a single numeral on the dial. The 30-minute counter sits at 9 o'clock and the running seconds at 3 o'clock, and Kurono made both counters as large as it could. The chronograph seconds hand and the 30-minute counter hand are fluorescent orange, so it's always clear which hands belong to the stopwatch. The arrow-tipped hour hand and sharp minute hand have lume.
Case and strap
The case is 40mm wide, 13.15mm thick including the domed box sapphire, and 50.2mm from lug to lug. It's high-polished 316L steel with a stepped bezel and classic piston pushers, and the back is solid steel. The white rubber strap fits flush between the 22mm lugs and closes with a steel pin buckle.
One thing to know: water resistance is only 30 metres. That's fine for daily wear, but low for a watch Kurono pitches as a tool chronograph.
The movement
Inside is the NE86PWT from Time Module, the company that supplies Seiko's movements to other brands. It's the no-date version of the column-wheel, vertical-clutch chronograph Seiko uses as the 8R46. It runs at 28,800 vph, winds in both directions, has 34 jewels and gives about 45 hours of power reserve. You won't see it, because the caseback is closed.
Price and how to buy one
The Structure Chronograph S1 costs US$3,690 before tax and duties, about €3,400. In Japan it's ¥575,000 before tax. Kurono doesn't give an edition size, only that this is one production run that won't be repeated, and you can buy one watch per person. Orders open online at kuronotokyo.com on Thursday 19 November at 11pm Tokyo time, which is 15:00 in central Europe. Deliveries are expected from mid-December.
Kurono releases tend to go quickly, so if one of these three dials has your attention, set an alarm. At this price, a well-designed column-wheel chronograph from an independent designer of Asaoka's level is hard to argue with.
Comments
No comments yet, be the first to weigh in.