Watch brandsWatch wikiWatch videosVariousWatch calendarSaved articles
PopularRolexOmegaPatek PhilippeAudemars PiguetTudorGrand SeikoCartierSeikoIWCTAG HeuerBreitlingJaeger-LeCoultreA. Lange & SohneZenith

Results for Beads of Rice Bracelet

30,831 articles · 1,989 videos found · page 953 of 1094

Related pages

Wiki · Guide
Beads of Rice Bracelet

Mid-century steel bracelet with discrete bead-shaped links; Gay Frères, NSA, Novavit; modern Forstner revival.

INTRODUCING: Longines Heritage Classic with “Sector Dial” Time+Tide
Longines Heritage Classic Oct 13, 2019

INTRODUCING: Longines Heritage Classic with “Sector Dial”

Amidst the morass of vintage reissues that almost all brands seem to have tried their hand at recently, Longines has been successfully combing their archives for the best examples that translate to current tastes, and have done so with good success in recent years. Even in the context of their well-executed reissues of military, chronograph … ContinuedThe post INTRODUCING: Longines Heritage Classic with “Sector Dial” appeared first on Time+Tide Watches.

Rolex Unicorns Part II – Ref. 8171 Triple Calendar “Padellone” in Steel SJX Watches
Rolex Unicorns Part II – Oct 13, 2019

Rolex Unicorns Part II – Ref. 8171 Triple Calendar “Padellone” in Steel

If I had a million dollars, or maybe two, to buy a Rolex, I could perhaps buy a ref. 4113 split-seconds, which is very large, very flat – a bit too large and flat for me – and exceptionally rare. Or I could buy a ref. 8171 triple calendar in steel, one in almost “new old stock” condition, as Phillips has in its upcoming Geneva auction. The ref. 8171 in question reminds me of the 369-year old Jehan Cremsdorff pocket watch Sotheby’s sold in the summer – it’s hard to believe something that old, admittedly not quite four centuries, can be so well preserved. The “Padellone” is incredibly – incredibly – clean and crisp. Up close, the ref. 8171 speaks for itself. The dial looks like the watch left the factory recently. It is clean, neat and the date track is in pure, vivid blue. Similarly, the hands are free of marks, meaning they were seldom, or never, removed from the dial. The condition of the dial is all the more unusual due to the fact that the ref. 8171 is not an Oyster. Instead, it has a snap-on back, instead of the water-resistant, screw-on back found on the Oyster watch case. Over time, snap backs tend to lose their water-resistance as a consequence of corrosion or deformation from repeated opening, which is why most ref. 8171s have dials that show obvious ageing. An example of a ref. 8171 with a dial showing ageing, this one offered at Christie’s Hong Kong in 2017 The steel case is similarly well preserved. Fortunately, steel is nota...

Celebrating half a century with the Seiko Automatic Chronograph 50th Anniversary SRQ029J Time+Tide
Seiko Automatic Chronograph 50th Anniversary Oct 12, 2019

Celebrating half a century with the Seiko Automatic Chronograph 50th Anniversary SRQ029J

Fifty years ago, Seiko released one of the first ever automatic chronograph movements in a watershed moment in watchmaking. To mark the occasion, Seiko has released the Seiko Automatic Chronograph 50th Anniversary SRQ029J, a watch that smartly dances the line between heritage and modern. We got a chance to take a closer look at the … ContinuedThe post Celebrating half a century with the Seiko Automatic Chronograph 50th Anniversary SRQ029J appeared first on Time+Tide Watches.

Battle for the blue with the Seiko Samurai ‘Save The Ocean’ SRPC93K Time+Tide
Seiko Samurai ‘Save Oct 12, 2019

Battle for the blue with the Seiko Samurai ‘Save The Ocean’ SRPC93K

Editor’s note: Seiko’s limited editions are pretty legendary, and for good reason. Some of the most coveted are those in the sporty Prospex line. Like this Seiko Samurai ‘Save The Ocean’ SRPC93K …  The story in a second: Same great watch, brand new dial. The centrepiece of Seiko’s 2018 Prospex collection is, without doubt, the … ContinuedThe post Battle for the blue with the Seiko Samurai ‘Save The Ocean’ SRPC93K appeared first on Time+Tide Watches.

RECOMMENDED READING: Just what is the Patek Philippe Seal?  Time+Tide
Patek Philippe Seal?  There are few Oct 11, 2019

RECOMMENDED READING: Just what is the Patek Philippe Seal? 

There are few things that high-end watch brands love more than a certification of quality. Some, like COSC, are industry-wide standards, while others (much like the movement) are strictly an in-house affair. The Patek Philippe Seal is one such certification.  The new Patek Philippe Seal dramatically transcends the original hallmark’s notion of quality and perfection. … ContinuedThe post RECOMMENDED READING: Just what is the Patek Philippe Seal?  appeared first on Time+Tide Watches.

In-Depth: Andersen Genève Montre à Tact for Only Watch 2019 SJX Watches
Audemars Piguet Oct 11, 2019

In-Depth: Andersen Genève Montre à Tact for Only Watch 2019

Only Watch founder Luc Pettavino is a very persuasive man. Every two years, he manages to convince small watchmakers to risk neglecting paying customers, and instead to spend a lot of time and effort to exercise their creativity in building a one-off timepiece – and then give the resulting watch to the Only Watch charity auction. Most watchmakers regard it as an honour to be asked for a contribution, after all, the list of participants include boldface establishment names like Patek Philippe and Audemars Piguet. While Luc also receives many offers from brands, he wants to curate an interesting mix of watches for each Only Watch auction, capped at a maximum of 50 watches or so each time – he alone decides what’s in and what’s out. A few brands have been dedicated supporters of the charity since the very beginning, and they are usually invited to return year after year. In the inaugural Only Watch auction in 2005, lot 1 was the unique Eros “Navigation Pleasure” wristwatch. It was the work of Andersen Genève, the brand founded by Svend Andersen, a 77-year old veteran independent watchmaker best known for co-founding the Académie Horlogère des Créateurs Indépendants (AHCI). When Luc visited Svend at Baselworld earlier this year to solicit a contribution for Only Watch 2019, he received a swift “yes”. With the watch required to be finished for a world tour starting just three months after Baselworld, quick decisions were necessary a...

Casio G-Shock GMW B5000GD-1 Review WatchAdvice
Casio G-Shock GMW B5000GD-1 Review Oct 11, 2019

Casio G-Shock GMW B5000GD-1 Review

Casio’s G-Shock (gravitational shock) watches have earnt a reputation for being one of the most robust and durable watches available on the market today. The concept of the sturdy G-Shock goes back to 1981, where a Casio Engineer named Kikuo Ibe was in charge of designing the G-shock prototypes.  Kikuo Ibe wanted a watch that would have water-resistance of 10 bar (100 meters), triple 10 resistance (10-year battery life) and to be able to survive a 10 feet fall. Kikuo Ibe put together a team of 3 individuals to test 200 different prototypes, to be able to meet all three criteria as set out by the engineer. Unfortunately, the team after vigorous testing were not able to meet these requirements.  The idea for the final design of the G-shock watch came when Kikuo Ibe observed a rubber ball in motion. He discovered that in a rubber ball, its centre is unaffected when the ball is moving and doesn’t suffer any shocks when it’s bouncing. Kikuo Ibe implemented this idea and was finally able to achieve all three criteria in the first G-shock model released in 1983; The G-shock DW5000C.  There have been many different designs of G-shock watches over the years with nearly all of them sharing the core principles that originated from the very first model; toughness, durability and reliability. In 2018, Casio released a set of GMW-B5000 watches which came with a solid stainless steel face and bracelet or rubber strap to suit. The GMW-B5000 models have the iconic square face desi...

Longines Introduces the Heritage Classic “Sector” Dial SJX Watches
Jaeger-LeCoultre Oct 11, 2019

Longines Introduces the Heritage Classic “Sector” Dial

Longines continues its streak of solidly made and eminently affordable vintage remakes with the Heritage Classic featuring a “sector” dial. The segmented dial design revisits a style, sometimes known as a “scientific” dial, that’s currently popular, one that has been done by brands as diverse as Habring2, Jaeger-LeCoultre and Laurent Ferrier. The sector dial was fairly common in the first half of the 20th century, and unlike most other companies doing remakes, Longines actually did produce such watches back in the day. According to Longines, the Heritage Classic is modelled on a watch from 1934 that’s in the company museum. As with the original, the sector dial on the remake is two-tone, with the chapter ring for the hour markers having a concentric brushed finish, while the central portion is finely grained. The markings are all printed, while the hands are blued steel. The Heritage Classic (left) and its 1934 inspiration The modern day remake is a faithful approximation of the original, right down to the typography for the Longines logo. It’s correctly proportioned as well, with a steel case that’s larger than the original but not too large, measuring 38.5mm in diameter and 10mm high, including the domed, “box glass” sapphire crystal. And because the case is matched with an appropriately sized movement that’s 25.6mm (or 11 1/1”’) wide, the subsidiary seconds does not sit too close to the centre of the dial, as is the case with large cases an...

A slightly smaller statement watch, the TAG Heuer Carrera Heuer 01 43mm Time+Tide
TAG Heuer Carrera Heuer 01 43mm Editor’s Oct 10, 2019

A slightly smaller statement watch, the TAG Heuer Carrera Heuer 01 43mm

Editor’s note: I’m on record as being quite the fan of TAG Heuer’s contemporary take on the Classic Carrera, but I’m fully willing to admit that the original version was a beast on the wrist - 45mm is a big mood, and not everyone is up for that. Which is why the 43mm is such … ContinuedThe post A slightly smaller statement watch, the TAG Heuer Carrera Heuer 01 43mm appeared first on Time+Tide Watches.

VIDEO: Blancpain’s Villeret GMT Date ensures elegance, no matter the time zone  Time+Tide
Blancpain s Villeret GMT Date Oct 10, 2019

VIDEO: Blancpain’s Villeret GMT Date ensures elegance, no matter the time zone 

Travel watches are typically seen as a rough-and-ready affair, a style dominated by hardy steel pieces that often seem to speak a language of adventure rather than luxury. But honestly, while this reflects a romanticised notion of travel, the reality, especially at the pointy end, is a much more civilised affair.  If civilised travel is … ContinuedThe post VIDEO: Blancpain’s Villeret GMT Date ensures elegance, no matter the time zone  appeared first on Time+Tide Watches.

Introducing the Hasta la Vista Revolver 8-Day Table Clock SJX Watches
Chanel Oct 10, 2019

Introducing the Hasta la Vista Revolver 8-Day Table Clock

A recent startup dedicated to creating unusual objects, The Unnamed Society makes its debut with a table clock shaped like the Colt Bisley Model revolver of the early 20th century. The clock is produced by L’Epee 1839, the Swiss clockmaker that is responsible for practically all of the unconventional and avant-garde mechanical clocks of recent years, most famously those designed by MB&F; but also Chanel. But it’s undoubtedly the success of MB&F;’s sci-fi clocks that have compelled various brands, old and new, to develop their own L’Epee 1839 clocks. Named Hasta la Vista, “goodbye” in Spanish, the clock is the shape and size of an actual revolver, measuring 350mm or just under 14 inches long. It’s made of steel and palladium-plated brass, and can be mounted on its accompanying base either via the grip or the barrel. Pictured here with the grip made of horn from the bighorn sheep, as well as engraving on the frame Mechanically it is identical to the 8-day clocks L’Epee 1839 has produced in other shapes and sizes. The time is indicated by two revolving cylinders – one each for the hours and minutes – that take the shape of the rear section of the pistol frame. The escapement, wheel train and mainspring are where the cylinder (which contains the bullets) would be. Winding is accomplished by a key that’s inserted into the end of the barrel. Though it’s a limited edition of 50, each clock can be customised with a variety of options offered for the g...

Rolex Unicorns Part I – Ref. 4113 Split-Seconds Chronograph SJX Watches
Zenith Daytonas Oct 10, 2019

Rolex Unicorns Part I – Ref. 4113 Split-Seconds Chronograph

If I had a million dollars, or maybe two, to buy a Rolex chronograph, I could perhaps buy one of the five unique “Zenith” Daytonas in platinum, a Datocompax “Jean-Claude Killy” (as Davide Munari did), a “Paul Newman” Daytona (not), or a ref. 4113 split-seconds. Of the many ways to spend that much money on a Rolex chronograph – and not any other complication – the ref. 4113 is the most unusual, interesting and horologically complex. At the same time, the ref. 4113 was also a dead-end for Rolex, because it never furthered development of the split-second chronograph and instead relied on standard chronographs for all its auto-racing activities. Produced in 1942 in a run of just 12 watches – with case numbers “051’313” to “051’324” -the ref. 4113 is the only split-seconds, or rattrapante, chronograph ever made by Rolex. Phillips will soon sell ref. 4113 with case number “051’318” – the watch pictured here – at its upcoming November watch auction. Ref. 4113 with case number “051’318” The Valjoux 55 inside The racing connection Though formal documentation as to its origins no longer exist or are unknown, the story behind the ref. 4113 is by now familiar thanks to research over the years as examples emerged at auction. In 1991, a pair of these emerged at Christie’s, at its Geneva and London salerooms respectively. The first, with case number was “051’313”, was sold in May 1991 at Christie’s in Geneva for 82,500 Swiss fr...

Dress blues – Baume & Mercier’s Clifton Baumatic with a gorgeous gradient blue dial Time+Tide
Baume & Mercier Oct 9, 2019

Dress blues – Baume & Mercier’s Clifton Baumatic with a gorgeous gradient blue dial

Editor’s note: Baume & Mercier’s flagship dress watch, the Clifton Baumatic, got a deep blue makeover earlier this year, which, combined with the classic styling and impressive movement, makes for a compelling daily dress offering … Baume & Mercier’s foray into the world of in-house movements resulted in one of the biggest value propositions of … ContinuedThe post Dress blues – Baume & Mercier’s Clifton Baumatic with a gorgeous gradient blue dial appeared first on Time+Tide Watches.

Business News: Rolex to Replace New York Headquarters with 25-Storey Building SJX Watches
Audemars Piguet museum according Oct 9, 2019

Business News: Rolex to Replace New York Headquarters with 25-Storey Building

A year after the opening of the Rolex Building in Dallas, designed by Japanese architect Kengo Kuma, London-based David Chipperfield Architects just announced it won an international design contest for the new Rolex skyscraper in New York City, beating out big names like Foster+Partners and Bjarke Ingels Group (which designed the new Audemars Piguet museum), according to industry publication Architects’ Journal. “Our team is committed to creating an exemplary building befitting the heritage and culture of the Rolex brand, as well as its prominent 5th Avenue location,” says Mr Chipperfield, speaking in the press announcement. Modernist and fronted entirely in glass, much like the rest of its work, the Chipperfield design will replace the watchmaker’s existing building located at 665 5th Avenue, on the corner with 53rd Street. Originally built for Danish silversmith Georg Jensen in 1924, the 12-storey building was revamped with a glass and aluminium facade when Rolex acquired it in 1977 for its American headquarters. The current Rolex Building, home to the company since the 1970s. Image – Google Maps A rendering of the new Rolex Building. Image – David Chipperfield Architects According to industry lore, the then chief executive of Rolex, Andre Heiniger, decided to buy the 5th Avenue building during a visit to the United States, closing the deal before getting the approval of the company’s board. Heiniger also led Rolex to acquire several dozen lo...

INTRODUCING: The Bremont H-4 Hercules  Time+Tide
Bremont H-4 Hercules  Oct 9, 2019

INTRODUCING: The Bremont H-4 Hercules 

The history of aviation is full of famous planes. For better or worse, planes like the Spirit of St. Louis, the Enola Gay and the Southern Cross are landmark machines in the evolution of the flying machine. But few vehicles loom larger in popular culture (or indeed reality) than the epic H-4 Hercules, popularly known … ContinuedThe post INTRODUCING: The Bremont H-4 Hercules  appeared first on Time+Tide Watches.

VIDEO: The wearer-friendly Blancpain Villeret Quantième Complet 8 Jours Time+Tide
Blancpain Villeret Quantième Complet 8 Oct 8, 2019

VIDEO: The wearer-friendly Blancpain Villeret Quantième Complet 8 Jours

On the face of it, Blancpain’s elegant Villeret Quantième Complet 8 Jours - or, if you don’t parlez vous, Complete Calendar 8 Days - is exactly the sort of thing you’d expect from the dressier family of one of Switzerland’s old marques. But once you get past the numerous traditional points - the day/month apertures, … ContinuedThe post VIDEO: The wearer-friendly Blancpain Villeret Quantième Complet 8 Jours appeared first on Time+Tide Watches.

Rolesor in the deep – the Rolex Sea-Dweller Reference 126603 Time+Tide
Rolex Sea-Dweller Reference 126603 Oct 8, 2019

Rolesor in the deep – the Rolex Sea-Dweller Reference 126603

To say there was quite a bit of controversy when Rolex unveiled the two-tone Sea-Dweller ref. 126603 at this year’s Baselworld is, at the very least, an understatement. In fact, there was nothing short of a litany of disparaging comments, which varied greatly in context, and ranged from questioning the two-tone Sea Dweller’s validity as … ContinuedThe post Rolesor in the deep – the Rolex Sea-Dweller Reference 126603 appeared first on Time+Tide Watches.