Watch brandsWatch wikiWatch videosVariousWatch calendarSaved articles
PopularRolexOmegaPatek PhilippeAudemars PiguetTudorGrand SeikoCartierSeikoIWCTAG HeuerBreitlingJaeger-LeCoultreA. Lange & SohneZenith

SJX Watches · Page 89

Grand Seiko Introduces the Spring Drive 8 Days Jewelry SBGD205 SJX Watches
Grand Seiko Introduces Mar 5, 2020

Grand Seiko Introduces the Spring Drive 8 Days Jewelry SBGD205

For its 60th anniversary, Grand Seiko has just unveiled one of the most extravagant, and expensive, watches ever – the Grand Seiko Masterpiece Collection Spring Drive 8 Days Jewelry Watch (ref. SBGD205). Combining the flagship Spring Drive model – made at the artisanal Micro Artist Studio – with a lavish setting of diamonds and sapphires, the Spring Drive 8 Days Jewelry Watch is a departure from the typical, subtle formality of Grand Seiko design. The base of the Spring Drive 8 Days Jewelry Watch is the SBGD201, an immense, heavy and refined wristwatch powered by the impressive 9R01 movement. Equipped with three barrels that give it a 192-hour power reserve, the 9R01 is finished to the same level as the much-vaunted Credor Eichi II, thought the massive full bridge means there are few details visible on the back. The dial of the watch is unusual. Though Grand Seiko (and Seiko) have always produced jewelled watches for women, this is probably the first heavily gem-set men’s model in a long time. The centre of the dial has a granular, slightly sparkly “dial dust” finish that is identical to the dial finish on the standard Grand Seiko 8 Days. But it has a subtle constellation of Leo – the Grand Seiko emblem is a lion – incorporated into the surface of the dial and visible only up close. Around the diamond-dust centre are two white gold chapter rings, one set with large, baguette-cut stones and the other with smaller, brilliant-cut stone. Each of the hours and ...

Grand Seiko Introduces the 60th Anniversary Hi-Beat 80 Hours SLGH002 SJX Watches
Grand Seiko Introduces Mar 5, 2020

Grand Seiko Introduces the 60th Anniversary Hi-Beat 80 Hours SLGH002

Of the half-dozen commemorative editions Grand Seiko is rolling out to mark its 60th anniversary, one watch is significant over all the others, because it has a brand-new calibre that represents the first of a new generation of movements. A complete rethink of the 9S family of movements – first unveiled 22 years ago – the 9SA5 makes its debut in the Grand Seiko 60th Anniversary Limited Edition (ref. SLGH002). While the movement is cutting-edge for the brand, the design of the SLGH002 is a throwback to vintage Grand Seiko – the dial emulates the aesthetics of the first Grand Seiko 3180 of 1960 but with a modern twist, namely with widened hands and hour markers. As a result, the dial is quintessential Grand Seiko, having a sculptural quality thanks to the broad dauphine hands and substantial, applied 18k gold hour markers. Even the frame around the date window is 18k gold. The star above six o’clock indicates “SD”, or “special dial”, which means gold hour markers (and sometimes a gold dial) Made of 18k yellow gold, the case has a diameter of 40 mm and a thickness of 11.7 mm. Most of its surfaces have a brushed finish, interspersed with wide, faceted bevels that are mirror polished. The watch is notably thin for a self-winding Grand Seiko – the typical high-frequency Grand Seiko has a case just over 13 mm high – as a result of the new 9SA5 movement, which is the work of the Grand Seiko Studio Shizukuishi (formerly known as the Shizukuishi Watch Studio). ...

Urwerk Introduces the UR-111C Two-Tone SJX Watches
Patek Philippe Mar 4, 2020

Urwerk Introduces the UR-111C Two-Tone

Two years ago, Urwerk unveiled the UR-111C, inspired by the UR-CC1 King Cobra of 2009, which was itself based on an experimental watch built by watchmaker Louis Cottier and jeweller Gilbert Albert for Patek Philippe in 1959. Displaying the time in a linear fashion, the UR-111C marked a departure from the wandering-hour satellite indication that has become the hallmark of Urwerk’s aggressively futuristic watches. Having already presented four variants of the watch in various finishes, as well as an engraved unique piece, the brand has now unveiled the UR-111C Two-Tone, featuring a case that combines a black coating with brushed and polished steel. The central portion of the case is executed in brushed steel, flanked by black-coated ends that close off the tube-like central portion. The use of different finishes accentuates the architecture of the case, drawing attention to its centre, which contains the key functions, including the time display and roller-style crown. Cosmetics aside, the UR-111C Two-Tone is otherwise identical to the earlier versions. At 42 mm by 46 mm and 15 mm high at its thickest point, it is by no means a small watch but the curvature of the case ensures it sits flat and comfortably on the wrist. Despite its complex design, time is presented in a fairly straightforward manner with three rounded sapphire windows located at the front edge of the case to facilitate better readability while driving. The jumping hours and progressive minutes are displaye...

Young Japanese Watchmaker Norifumi Seki Makes His Debut SJX Watches
Mar 4, 2020

Young Japanese Watchmaker Norifumi Seki Makes His Debut

Just 23 years old – he was born in 1997 – Norifumi Seki graduated from watchmaking school last year, and recently completed his first timepiece, the Sphere Moon Phase Pocket Watch. Though inspired by the works of past watchmakers, Mr Seki’s creation is surprisingly novel in both aesthetics and construction, especially since it is essentially a school project. Based in Tokyo, Mr Seki has trod a short path to create this impressive watch. After graduating from junior high school, which is for children aged 12 to 15 in Japan, his interest in mechanics and craftsmanship led him to fabricate simple objects, including a beautifully-made folding knife. Inspiration In 2016, Mr Seki met Masahiro Kikuno – arguably Japan’s most interesting contemporary watchmaker – who inspired him to manufacture a watch by hand. And so at age 18, Mr Seki entered Hiko Mizuno College of Jewelry, a school in Tokyo’s Shibuya district that also teaches watchmaking and shoemaking. During his final year in school, Mr Seki started on his own watch. It’s a large pocket watch with a regulator-style time display, oversized date and month indicators, along with an extra-large spherical moon phase. Spherical moon and drum calendar Made entirely of titanium, the moon phase is 20 mm in diameter and set via a recessed pusher in the case band. A third of the sphere is heat-blued titanium, while the other is coated in gold. Show in two large windows, each containing two drums for the digits, the cale...

Up Close: Grand Seiko Elegance Collection ‘Thin Dress’ SBGK007 SJX Watches
Grand Seiko Elegance Collection ‘Thin Dress’ Mar 4, 2020

Up Close: Grand Seiko Elegance Collection ‘Thin Dress’ SBGK007

Grand Seiko’s newest design style – the “Thin Dress” – combines a slightly retro case and dial with the signature hallmarks of the brand like diamond-cut hour markers, while being original in that is not obviously based on a vintage Grand Seiko model. Launched in early 2019 as part of the Elegance Collection, first with quartz and then mechanical models, the new design is used for the flagship Spring Drive SBGZ001 and SBGZ003 – magnificently-crafted watches that unfortunately start at US$57,000. Fortunately, the line-up is diverse enough that it includes an entry-level, mechanical model with a robust price-to-performance ratio, the Elegance Collection “Thin Dress” SBGK007. The SBGK007 is a compact, hand-wound wristwatch with a fairly minimalist design along with a handful of retro elements – in short, it is handsome and slightly vintage in feel. And the SBGK007, along with the rest of the Elegance Collection, was designed after Grand Seiko was spun off from Seiko to create an independent brand. As a result, the watch was designed from the ground up as a Grand Seiko, and perhaps for that reason the dial feels more visually balanced than earlier models that had “Seiko” removed from the dial. Elegant retro The SBGK007 is a compact watch, but sized very well, neither too big nor too small, measuring 39 mm in diameter and 11.6 mm high. Because of the case style and construction, it feels thinner than it measures, while also having a strong vintage vibe i...

Hands-On: De Bethune DB28GS Grand Bleu SJX Watches
De Bethune DB28GS Grand Bleu Like Mar 3, 2020

Hands-On: De Bethune DB28GS Grand Bleu

Like the bizarre-looking, ultra-deep sea creatures that produce bioluminescent light, De Bethune’s DB28GS Grand Bleu boasts its very own, self-contained light source – hardly surprising given what De Bethune is all about. Since its inception in 2002, De Bethune has expanded its aesthetic and technical language, going from relatively classical, Breguet-inspired watches to timepieces that are at the cutting edge of modern horology. Most of its contemporary watches feature far-flung, otherworldly designs, a house style that no doubt made it challenging to ensure the Grand Bleu conforms to the ISO 6425 dive-watch specification. The resulting Grand Bleu is perhaps one of the most extravagant and extraordinary dive watches ever – this video shows the illumination in action. Though De Bethune dabbled in oversized sports watches well over a decade ago, starting with the DB24 Super Sport of 2007, the Grand Bleu is evolved from the more recent DB28GS launched in 2015. While the DB28GS was already a hardcore sports watch with a high-tech movement, the Grand Bleu takes it further -or mor eacccurately, deeper. It combines a brand-new case with a new movement equipped with a mechanical dynamo that powers a set of tiny LED lamps. The more sedate DB28 Grand Sport A new case The Grand Bleu is a large 44 mm, and rated to 100 m. At 12.8 mm high, it is thicker than most De Bethune watches but still slim for a dive watch. But the highlight of the case are the spring-loaded, open-wor...

Business News: Watchmakers Announce Geneva Watch Days [Postponed] SJX Watches
Girard-Perregaux Gerald Genta Ulysse Nardin Mar 3, 2020

Business News: Watchmakers Announce Geneva Watch Days [Postponed]

Following the cancellation of both the year’s biggest watch fairs – Baselworld and Watches & Wonders Geneva (WWG) – due to the COVID-19 coronavirus, a consortium of watch brands have come together to show their wares come April. The event, dubbed Geneva Watch Days, was the brainchild of Bulgari and its chief executive Jean-Christophe Babin – one of the first brands to pull out of Baselworld – and conceived with European press and retailers in mind. [Update March 24, 2020: GWD will now take place August 26-29, 2020 instead.] WWG to GWD Taking place when WWG was due to happen, April 26 to 29, Geneva Watch Days now has a line-up of brands big and small: Girard-Perregaux, Gerald Genta, Ulysse Nardin, Breitling, MB&F;, De Bethune and Urwerk. A handful more might sign on, including H. Moser & Cie. and Chopard. However, at present, none of the brands belonging to the major watchmaking conglomerates, Richemont or Swatch Group, or either of the Geneva giants, namely Rolex and Patek Philippe, has announced their participation – and are unlikely to due to the complexities of the industry. Crucially, Geneva Watch Days is not a fair per se, rather it is a series of events organised by brands in separate venues, including boutiques and hotels, but happening during the same period. Because the individual events during Geneva Watch Days are small-scale and discrete, none of them will run counter to the Swiss government’s temporary ban on events with over 1,000 people. ...

Tudor Introduces the Pelagos “Qatar Watch Club” SJX Watches
Chopard L.U.C GMT Mar 2, 2020

Tudor Introduces the Pelagos “Qatar Watch Club”

Founded two years ago, the Qatar Watch Club (QWC) is a community of internet-savvy watch enthusiasts in the wealthy Arab nation. The club recently got together with Tudor and local watch retailer Fifty One East to create the Pelagos “Qatar Watch Club”, a limited edition of the brand’s top-spec dive watch. The second QWC edition after last year’s Chopard L.U.C GMT, the Pelagos has “Qatar” in Arabic, or “قطر‎”, on the dial at six, replacing the five lines of text on the standard model, giving it a much cleaner look. The other point of distinction is the club logo engraved on the case back. The rest of the watch is identical to the standard model, which means a titanium case rated to 500 m and a scratch-resistant, blue-ceramic bezel insert. And the watch is equipped with the MT5612 movement. A proprietary calibre produced by Kenissi, a joint venture Tudor shares with Chanel, the calibre has a 70-hour power reserve, silicon hairspring, and is an all-round strong performer, particularly at this price point. The watch is delivered in a box bearing the QWC logo, as well as an additional blue rubber strap. Only 50 were produced – the club has 50 members – and at press time all have been spoken for. QWC members at last year’s launch event for the Chopard L.U.C GMT QWC edition. Photo – QWC Key facts Tudor Pelagos Qatar Watch Club Special Edition Ref. M25600TB-0001 Diameter: 42 mm Thickness: 14.3 mm Material: Titanium Water resistance: 500 m Movement:...

Hands-On: Cartier Privé Tonneau Skeleton Dual Time SJX Watches
Cartier Privé Tonneau Skeleton Dual Mar 1, 2020

Hands-On: Cartier Privé Tonneau Skeleton Dual Time

Launched last year alongside the time-only Tonneau, the Privé Tonneau Skeleton Dual Time is classical Cartier in style and execution. The case is a century-old Cartier design that has not aged, while the movement is interesting in aesthetics and mechanics. In fact, the 9919 MC inside is surprisingly novel – it’s a skeleton, form, and curved movement with two time zones. The Tonneau Skeleton is also being produced in a modest limited edition, which means it will remain unusual. But it is hindered by a high price tag. Double fuseau The Tonneau Skeleton Dual Time is modelled on the Tonneau double fuseau (French for “double time zone”) that was produced in a variety of versions, including a 1999 Macau handover commemorative edition, from the 1990s until the mid 2000s. A Cartier Collection Privee Cartier Paris (CPCP) Tonneau dual time zone in white gold, c. 1998. Photo – Sotheby’s Cartier was particularly fond of the twin time zone complication during the period, and the double fuseau was also produced in many Tank case styles, ranging from the Tank Cintree to the Tank Louis Cartier. Despite the diversity, all the double time zone watches shared a common feature – they were powered by two separate small movements – either mechanical or quartz, depending on the model – essentially two tiny watches combined into an extra-large case. Though mechanically unsophisticated, the two-in-one construction made each time zone entirely independent, down to the minute....

Breaking News: Baselworld 2020 Cancelled, Becomes Baselworld 2021 [Updated] SJX Watches
Rolex Feb 28, 2020

Breaking News: Baselworld 2020 Cancelled, Becomes Baselworld 2021 [Updated]

On a fast-moving Friday that started with the first case of the COVID-19 coronavirus in the city of Basel being diagnosed according to Swiss newspaper Le Temps, the day culminated in the organisers of Baselworld 2020 announcing its postponement to January 2021, essentially cancelling this year’s trade fair. This comes a day after the organisers of Geneva watch fair Watches & Wonders announced it was cancelled, which wipes out the entire year’s calendar for the major watch industry events. Though the Baselworld organisers had initially planned to meet on Monday, March 2, according to an announcement by Hubert J. du Plessix, the president of the event’s exhibitors committee (and also the director of investments and logistics at Rolex), events got ahead of them. The primary catalyst Baselworld’s cancellation was the Swiss government declaring a ban on all gatherings of over 1,000 people, until at least March 15 – which instantly made the Geneva Motor Show, one of the automotive industry’s most important events, a non-starter. Now Baselworld 2021 will take place from January 28 to February 2, with press day happening on January 27. Baselworld managing director Michel Loris-Melikoff, commenting in the announcement of the event’s cancellation, stated “We have found a solution that enables the industry and all our customers to avoid losing a full year and at the same time reset their calendars for the beginning of the year, a period that is conductive to the...

Business News: RJ-Romain Jerome Declares Bankruptcy SJX Watches
Hublot manager Mr Arpa was Feb 27, 2020

Business News: RJ-Romain Jerome Declares Bankruptcy

RJ Watches, better known as Romain Jerome, has just gone bankrupt. Announced almost exactly a month after De Grisogono met the same fate, the bankruptcy of RJ Watches SA is the consequence of its majority shareholder, a company controlled by a member of the Saudi royal family, deciding to “stop investing in the company”. Though RJ was never a major watchmaker – its peak revenue was around 20 million Swiss francs – the brand was often in the headlines thanks to its shrewd and occasionally ridiculous marketing. Founded in 2004 and named after the two sons of its founder, Alain Bajulaz, RJ started out making mechanical golf-counter watches, but swiftly took a drastic new direction after Yvan Arpa was appointed chief executive in 2006. By then owned by the Saudi investor, RJ enjoyed a brief period of turbocharged, and in hindsight unsustainable, growth under Mr Arpa. A former Hublot manager, Mr Arpa was a fervent marketer of the most preposterous ideas that were somehow weirdly compelling. Amongst his creations were the rusty-looking Titanic DNA watches and timepieces sprinkled with actual Moon dust. Perhaps the masterpiece was a rusty-Titanic double tourbillon that had no hands and did not tell the time. The 2008 collaboration between Romain Jerome and Cabestan producing the Titanic DNA tourbillon – and now both brands are no more The case has a stabilised and protected rusty-look finish Mr Arpa and the company parted ways in 2009 amidst a lawsuit, and he went o...

Hands-On: A. Lange & Söhne Grand Lange 1 Moon Phase 25th ‘Anniversary’ SJX Watches
Casio n ten limited edition Feb 27, 2020

Hands-On: A. Lange & Söhne Grand Lange 1 Moon Phase 25th ‘Anniversary’

Last year was the 25th anniversary of A. Lange & Söhne’s modern-day revival in 1994, also the debut year of the iconic Lange 1. For the occasion, ten limited edition Lange 1 models were unveiled over the course of the year. The line-up ranged from the basic to the ultra complicated, but one of the standouts was a model in the middle of the spectrum – the Grand Lange 1 Moonphase “25th Anniversary”. Introduced in 2003, the Grand Lange 1 was essentially an upsized Lange 1, with a larger but slightly thinner case – and the same L901.0 movement found in the standard Lange 1. The result was an awkward, cramped dial with overlapping displays that abandoned the orderly asymmetry of the classic Lange 1 dial. Nine years later, the Grand Lange 1 movement was redesigned to create the cal. L095.1, which accommodated all of the indications on a dial with the correct proportions. A moon phase was added to the movement the following year, which increased its thickness slightly. The 25th anniversary edition is a second generation Grand Lange 1 Moon Phase with a subtle, beautiful twist – and one of the most appealing models from the anniversary line-up. Anniversary livery Though large, the watch is notably flat, giving it an elegant profile on the wrist. With a height of 9.4 mm, the white gold case is still thinner than that of the basic Lange 1, despite having the additional moon phase complication. The tripartite case construction has a brushed middle between the polish...

Breaking News: Watches & Wonders Geneva Cancelled SJX Watches
Citizen have already pulled out Feb 27, 2020

Breaking News: Watches & Wonders Geneva Cancelled

Watches & Wonders Geneva (WWG), the trade show formerly known as SIHH, has just announced its cancellation. Scheduled to take place in Geneva from April 25 to 29, the event was canned due to “the latest developments concerning the worldwide spread of the COVID-19 coronavirus”. Organising body Fondation de la Haute Horlogerie (FIHH) said in a statement that the decision was made “to protect the health and wellbeing of all our guests, press, partners and teams.” Its announcement comes not long after Switzerland confirmed its first patient with the coronavirus on Tuesday, alongside a sudden spike in cases in Italy. A scene from SIHH 2019 WWG is the second major Swiss event to be cancelled, following the Swatch Group’s decision to call off Time to Move in Zurich, a launch exhibition of its new watches, which was scheduled to take place from February 28 to March 2. Industry insiders now expect Baselworld 2020, slated to take place right after WWG, to follow suit. Several exhibitors at Baselworld, including Bulgari and Citizen, have already pulled out of the fair. But as of February 20, the world’s biggest watch and jewellery trade show is still going ahead.

Hands On: Ferdinand Berthoud Chronomètre FB 1 “Oeuvre d’Or” SJX Watches
Chopard Feb 26, 2020

Hands On: Ferdinand Berthoud Chronomètre FB 1 “Oeuvre d’Or”

Backed by Chopard and taking the name of a noted 18th century French watchmaker, Ferdinand Berthoud made its debut in 2015 with the Chronomètre FB 1. Though unusual in style with an octagonal case, the FB 1 boasts an impressively constructed movement developed and manufactured by the same facility responsible for Chopard’s top-of-the-line L.U.C calibres; the project was the brainchild of Chopard co-president Karl-Friedrich Scheufele. At its core the FB 1 is an elaborate – and delightfully anachronistic – tribute to 18th century marine chronometers inside and out. The subject of four patents, the unusual calibre is very much antiquarian horology; it is constructed with pillar-style architecture and contains a chain-and-fusée, feeler-and-cone power reserve mechanism, and a large tourbillon with central seconds. Since the debut of the FB 1, there have been as many as ten subsequent variations – which is probably too many but it doesn’t diminish from the intrinsic, technical qualities of the watch – with one of the most recent being the Chronomètre FB 1 “Oeuvre d’Or” launched last year. Mechanically identical to the other iterations, the Oeuvre d’Or is distinguished by extra decoration, namely an engraved and grained gold dial as well as gold movement bridges engraved with a repeating pyramid motif. The Oeuvre d’Or FB 1.1-2 in white gold A tribute to marine chronometry Modern day Berthoud watches are inspired by the works of its 18th century namesak...

Hands-On: Ulysse Nardin Diver X Cape Horn and Nemo Point SJX Watches
Ulysse Nardin Diver X Cape Horn Feb 25, 2020

Hands-On: Ulysse Nardin Diver X Cape Horn and Nemo Point

Dive watches priced below US$10,000 are one of the saturated and competitive segments in watchmaking. The category is dominated by two dive watch icons, the Rolex Submariner and the Omega Seamaster, both of which set the bar high with high-spec, in-house escapements equipped with high-tech hairsprings and next-level chronometer certifications. Ulysse Nardin smartly steered away from the conventional dive-watch look with last year’s new Diver X. Created to mark the brand’s newly-forged partnership with Vendée Globe, a non-stop solo yacht race around the globe, the Diver X Cape Horn and Diver X Nemo Point are a contemporary take on the standard Diver Chronometer 44mm, dressed up in new materials and colours but retaining the same basic specs, namely a 300 m rating and an in-house movement with a proprietary escapement. The Diver X Cape Horn Dubbed the “Everest of the Seas” because of its reputation as the toughest sailing competition in the world, the Vendée Globe is such an arduous journey that the eight races since 1989 have claimed three lives. Competitors have to travel over 40,000 km, a round-the-world trip that takes between two to four months. Unsurprisingly, the twin Diver X editions are aggressively styled and technically robust. Form and function Each named after key points along the Vendée Globe route, the Cape Horn and Nemo Point have the longstanding, symmetrical layout of a Ulysse Nardin diver’s watch – originally inspired by the dial of the br...

In-Depth: The Unfinished George Daniels Watch SJX Watches
Breguet idea while Feb 23, 2020

In-Depth: The Unfinished George Daniels Watch

George Daniels’ contributions to horology, as a watchmaker, historian and educator, were multi-dimensional. Most are widely known, and his watches are now incredibly valuable. But one of his creations – the “Unfinished Daniels” – remains tantalisingly incomplete, residing in the Clockmakers’ Museum within London’s Science Museum (which is also now home to Daniels’ Space Traveller II pocket watch). Even though he completed only a small number of watches – 23 pocket watches and four wristwatches made by hand, along with the serially-produced Millennium watches – Daniels’ inventions, techniques and philosophy have been deeply influential. His successor Roger W. Smith now practices the Daniels method with his own hand-made watches, but other notable watchmakers, including Francois-Paul Journe, have cited Daniels as an inspiration. The unfinished Daniels movement in the George Daniels exhibit in the Clockmakers’ Museum. Photo – Science Museum Like many great watchmakers over the ages, Daniels’ pursued perfect chronometry throughout his career; inventing a novel, superior escapement was perhaps his greatest achievement. And he managed to do it twice. Having observed that the sliding friction in the conventional Swiss lever escapement affects the rate of a movement over time, he set about developing solutions. He invented two escapement types: one inspired by a 18th century Abraham-Louis Breguet idea, while the other was the entirely original and mo...

Urwerk to Sell UR-111C Worn by Robert Downey Jr. for Charity SJX Watches
Urwerk Feb 20, 2020

Urwerk to Sell UR-111C Worn by Robert Downey Jr. for Charity

Synonymous with playing Iron Man in Disney’s The Avengers franchise, Robert Downey Jr. is also a fan of Urwerk, having worn several of its watches on screen. Having loaned an Urwerk UR-105 CT to Mr Downey to wear in Avengers: Endgame, the watchmaker then offered the watch up for a good cause, selling it at Phillips auctioneers last year for US$312,500. Proceeds from the sale went to Random Act Funding, a charity established by Mr Downey and his wife, Susan. Now another watch worn by Mr Downey is going under the hammer, once again to benefit Random Act Funding. The watch in question is the UR-111C Black that was worn by Mr Downey to the premieres of Avengers: Endgame in New York and Los Angeles last year. Robert Downey Jr. sporting the UR-111C. Photos – Urwerk Offered in like-new condition, the UR-111C is one of just 25 examples made and identical to the standard model save for one important detail: “RDJ” is engraved on the case place where the serial number would usually be. The watch is being sold in an online auction, with the bidding starting at 125,000 Swiss francs. Bids can be placed from now until 9:00 pm Swiss time on February 24. Only registered members of Urwerk Pre-Owned can bid on the watch, and registration can be done on Urwerkpreowned.com. For more information, please contact Urwerk social media manager Alex Rose.  

Chanel Introduces the J12 X-Ray SJX Watches
Bell & Ross Feb 20, 2020

Chanel Introduces the J12 X-Ray

To mark the 20th anniversary of the J12, Chanel is premiering not one but two epic versions of the iconic ceramic watch. While the first features a striking two-colour ceramic case, the second is perhaps the ultimate J12. Rendered entirely in clear sapphire – case, bracelet, and movement – the J12 X-Ray is delicate, extravagant and novel. Clear and second only to diamond in hardness, sapphire is also fragile and susceptible to chipping, cracking or shattering. Its properties are similar to that of ceramic, the defining material of the J12, except more extreme. As it is with Chanel’s ceramic cases, the sapphire parts of the J12 X-Ray are made by Chanel subsidiary G&F; Chatelain, a case maker that has produced sapphire cases for another Chanel-owned brand, Bell & Ross. Measuring 38mm wide, the case is machined from a single sapphire block and topped by a white gold bezel set with baguette-cut diamonds. Similarly, the dial is also sapphire, and fitted with a minute track and hands in white gold. All of the hour markers, on the other hand, are baguette-cut diamonds. Sapphire bridges and links And beneath the sapphire dial – which also doubles up as the movement base plate – is the Caliber 3.1. Derived from the rectangular, skeletonised Caliber 3 found in the in the Boy-Friend Skeleton, the Caliber 3.1 is hand-wound with all of its moving parts secured by sapphire bridges, which allows the movement to be seen from the front and back. The pivots of the gears of the go...

Up Close: Girard-Perregaux Classic Bridges 45 mm SJX Watches
Girard-Perregaux Classic Bridges 45 mm Feb 20, 2020

Up Close: Girard-Perregaux Classic Bridges 45 mm

Girard-Perregaux is best known for the Tourbillon with Three Gold Bridges, one of the most distinctive and beautiful movements in watchmaking – even 160 years after it was first designed. Characterised by its symmetry and arrow-shaped bridges, the Tourbillon with Three Gold Bridges is one of the few movements has an irrefutably iconic design. Some of the three-bridges magic has democratised with the Girard-Perregaux Classic Bridges 45 mm, a time-only watch that’s a more affordable take on the 19th century design. Constant Girard’s movement French watchmaker Jean-Antoine Lépine revolutionised the construction of the watch movement around 1770 when he invented the Lépine calibre, which used bridges and cocks to secure the moving parts on the base plate, replacing the prevailing pillar construction where the parts were held between two full plates. Almost a century later, Girard-Perregaux founder Constant Girard took Lépine’s idea a step further by rethinking the layout of the movement, with an eye towards not just mechanical function, but also beauty. A Girard-Perregaux pocket watch with nickel-plated parallel bridges, c. 1875. Photo – Antiquorum Starting in the mid 1850s, Girard began working on a caliber with its barrel, gear train, and regulator arranged vertically in a straight line. They were secured by identical, parallel bridges shaped like an elongated rhombus, creating an incredibly elegant equilibrium in the movement layout. Eventually the large, par...

Chanel Introduces the J12 Paradoxe SJX Watches
Chanel Introduces Feb 20, 2020

Chanel Introduces the J12 Paradoxe

Having given the J12 a thorough revamp last year, Chanel has just dropped the most astonishing iteration of its signature watch in the lead-up to Baselworld 2020 – the J12 Paradoxe. Conceived to mark the 20th anniversary of the iconic watch, the J12 Paradoxe looks like a digitally doctored timepiece at first glance. In fact, the stock images of the watch would pass for an abstract J12 ad. But J12 Paradoxe is actually two-tone – two thirds of the case in white ceramic and the remainder in black ceramic. Rely on the same concept but more valuable materials, Chanel is also rolling out the uber-extravagant J12 Paradoxe Diamonds combining black ceramic, white gold, and diamonds. While ceramic is about four times harder than steel, the hardness makes it brittle and delicate to machine, making a ceramic watch case slightly more challenging to fabricate than the same in steel. Produced by G&F; Chatelain, the buckle and case-maker owned by Chanel, the case is essentially two sections of ceramic anchored to an inner steel frame. Each section is secured to the frame with two screws, which are visible on the back of the watch. And the movement is also contained with the frame. Because of the multi-part construction of the case, the water resistance is 50 m, instead of the 200 m of the standard J12 that has a single-piece ceramic case. The dial and bezel insert continue the colours of the case, but each component is a single piece that’s been treated to create a two-colour fini...

Up Close: Keaton Myrick ‘1 of 30’ Wristwatch SJX Watches
Rolex which he joined after Feb 19, 2020

Up Close: Keaton Myrick ‘1 of 30’ Wristwatch

An American watchmaker who unveiled his first watch in 2013, Keaton Myrick has spent the subsequent years refining the 1 of 30, a wristwatch crafted with traditional, artisanal methods. Since then the 38-year old has delivered several examples of the 30-piece edition, each customised to the client’s request in terms of design; the watch pictured is numbered “30/30” and is largely stock, with the only custom option being the engine-turned seconds sub-dial. Based in Sisters, a town in the Pacific Northwest state of Oregon, Keaton studied watchmaking at the Lititz Watch Technicum (LWT), a school in Pennsylvania established by Rolex, which he joined after graduation. After several years there, he returned to his hometown to set up a workshop specialising in repair and restoration. 1 in 30, numbered “30/30” Keaton’s time at LWT was the genesis of the 1 in 30. According to Keaton, each student at the LWT had to build a school watch based on the ETA Unitas 6497 (or the related 6498), a project that evolved into the 1 in 30. With inspiration from independent watchmakers like Philippe Dufour as well as complicated vintage pocket watches – the historical inspiration is particularly evident in the winding click – Keaton modified and refined the common and robust Unitas movement to create the impressive and original cal. 29.30 inside the 1 in 30. Cal. 29.30 Being easily available and reliable, the Unitas 6497 and 6498 are popular base movements for independent watch...

Recommended Reading: The Swiss Cryptography Machine Maker Owned by the CIA SJX Watches
Oris Hagelin had once hoped Feb 19, 2020

Recommended Reading: The Swiss Cryptography Machine Maker Owned by the CIA

Switzerland has a well-earned reputation for producing high-quality machinery and engineering, mostly produced by small and medium-sized businesses making equipment like machine tools, printing presses, and lifts. For the same reasons, Switzerland boasts world-class watch companies, most of which share the same prowess in manufacturing and engineering. As it happens, a Swiss company was an industry leader in cryptography machines for several decades in the late 20th century. Founded by a Swede in Switzerland, Crypto AG sold mechanical encoding devices to some 120 countries, including Iran, India, and the Vatican. Although digital cryptography has now rendered cryptography hardware obsolete, such machines were once crucial to international diplomacy, intelligence, and espionage. Crypto AG was a key producer of these machines, helped by the fact that Switzerland is a neutral country. But a recent investigation by the The Washington Post and German public television network Zweites Deutsches Fernsehen (ZDF) have revealed that since 1970, Crypto AG was secretly owned by the CIA and Bundesnachrichtendienst (BND), Germany’s federal intelligence service. The news has since spiralled into a scandal in Switzerland – where neutrality has been a national policy since the 19th century – with the government setting up an inquiry to investigate just how much former officials knew. Building in backdoors According to the Post, Crypto AG founder Boris Hagelin had once hoped to pas...

Breitling Introduces the AVI Ref. 765 1953 Re-Edition SJX Watches
Breitling Introduces Feb 18, 2020

Breitling Introduces the AVI Ref. 765 1953 Re-Edition

Almost exactly a year after Breitling announced the Navitimer Ref. 806 remake – a spot-on remake of the first Navitimer and a smash hit – the watchmaker has applied the same formula for the AVI Ref. 765 1953 Re-Edition, a limited edition of 1,953 watches in steel. Introduced in 1953 and produced in several variants until 1965 when it was rebranded the Co-Pilot, the AVI ref. 765 was typical of mid 20th century pilot’s chronographs, with large Arabic numerals, syringe hands, and a steel rotating bezel. In fact, it is reminiscent of the Type 20 chronographs supplied by Breguet, Auricoste and other firms to the French navy and air force during the same period. Remade exactly And the AVI ref. 765 was oversized for the era, with a case measuring 41.1 mm. According to Breitling, the AVI Re-Edition replicates the original to the smallest detail, down to the tenth of a millimetre of case diameter. The steel bezel is even secured by three screws in exactly the same spots as on the original. Only two external elements on the remake have been changed: one is the removal of “Geneve” from the dial, a necessity given Breitling’s location; and the other is the increased water resistance of 30 m. That being said, modern production techniques and materials mean that rather than being perfectly identical, the replica is probably better in fit and finish than the original. The lacquer-filled engraving on the bezel, for instance, is more precisely done on the modern version. The vi...

Breguet Introduces the Classique Tourbillon Extra-Plat 5367 Blue Enamel SJX Watches
Breguet Introduces Feb 18, 2020

Breguet Introduces the Classique Tourbillon Extra-Plat 5367 Blue Enamel

Slim, elegantly and typically Breguet in style – the gently off-centre dial echoes asymmetric pocket watches – the Classique Tourbillon Extra-Plat 5367 was originally launched with a guilloche dial, before being given a white, fired enamel dial. And last year Breguet debuted a striking variant with a fully skeletonised movement decorated in a surprisingly elaborate manner. For 2020 Breguet has returned to its traditional look, albeit with a twist: the dial has been transformed into deep blue enamel for a boutique-only edition. Similar to the makeover applied to the time-and-date Classique 5177, the blue dial is grand feu enamel – vitreous enamel set by firing it in an oven at temperatures over 800°C. The dial starts as a disc of solid gold, which is then painted with a mixture of enamel powder, water and oil.  It’s then baked in an oven, and the process repeated several times until the deep blue colour is achieved. The surface is then ground down by hand to give it a mirrored finish, before undergoing a final trip to the oven. The star and lozenge minute track is inspired by the same on vintage pocket watches Then the markings on the dial – including the symbols of the minute track and Breguet numerals – are printed in powdered silver, which gives them a granular, metallic sheen. And faintly etched by laser just above the tourbillon is the Breguet “secret” signature, a feature devised in the 19th century to distinguish genuine Breguet pocket watches from ...

IWC Introduces the Portugieser Monopusher Chronograph “Laureus Sport for Good” SJX Watches
IWC Introduces Feb 18, 2020

IWC Introduces the Portugieser Monopusher Chronograph “Laureus Sport for Good”

An annual edition now in its 14th year, the “Laureus Sport for Good” helps support the foundation of the same name, which promotes sport amongst disadvantaged and disabled children around the world. In a departure from the norm of using a current model as the base, the 2020 edition is a brand-new reference that’s not yet in the catalogue (though it probably will be by Watches & Wonders 2020), the Portugieser Monopusher Chronograph “Laureus Sport for Good”. The Portugieser Monopusher Chronograph is an unusual watch: a manual-wind, single-button chronograph with a long power reserve of 192 hours, or eight days. It’s powered by the cal. 59360, which has a notably thin chronograph mechanism built over the cal. 59000 eight-day movement. The movement, however, not actually new. It was last used in 2015 inside the Portofino monopusher chronograph, but subsequently absent until now. (Reputedly the movement had kinks that required fixing, particularly in terms of timekeeping while running the chronograph.) The cal. 59360 with its thin chronograph mechanism; note the wide and flat column wheel The movement is wide and relatively flat, resulting in a large watch that’s 46 mm wide and just shy of 14 mm high. Given the traditional Portugieser design of a wide dial and narrow bezel, the size of the watch is particularly pronounced. As is traditional with the Laureus edition, the dial is a deep, metallic blue with ample space for the two chronograph registers as well as the...

Obituary: Kiu Tai Yu, Chinese Independent Watchmaker SJX Watches
Montblanc Feb 17, 2020

Obituary: Kiu Tai Yu, Chinese Independent Watchmaker

Born in China but having worked in Hong Kong for decades, Kiu Tai Yu was long reputed to have been the first watchmaker to produce a tourbillon wristwatch in Asia, having premiered his own in 1990. Before that, only watchmakers in the West had ever produced a tourbillon, a device that was then still regarded as the pinnacle of artisanal watchmaking. A year after unveiling his tourbillon, Kiu became the first Asian member of the Académie Horlogère des Créateurs Indépendants (AHCI), the association of independent watchmakers that had been established by Svend Andersen and Vincent Calabrese just a few years before. The news of Kiu’s death was first announced by Mr Calabrese on Facebook. Kiu Tai Yu in his shop. Photo – Vincent Calabrese But it was in 1993 that Kiu debuted his most memorable invention, the Mystery Tourbillon. Equipped with an oscillating balance wheel making one revolution a minute, but seemingly with neither a cage nor bridge. The secret lay in a clear sapphire plate that functioned as the upper bridge, while the cage of the tourbillon was reduced to a fish-shaped platform underneath the balance wheel, a construction that has since been adopted in various forms by brands like Montblanc and Zenith. Not content with a mere Mystery Tourbillon, Kiu subsequently installed the invention in a rectangular form movement, and later even added a jumping hour time display. It’s worth pointing out that every one of Kiu’s tourbillon wristwatches was unique, and ...

Vacheron Constantin Introduces the Égérie Ladies’ Collection SJX Watches
Vacheron Constantin Introduces Feb 17, 2020

Vacheron Constantin Introduces the Égérie Ladies’ Collection

Reviving a name once used for a line of tonneau-shaped women’s watches, Vacheron Constantin has just unveiled the Égérie, now a round watch with an unusually positioned crown. Translating as “muse”, Égérie is a slightly larger and more casual automatic watch for ladies, setting it apart from Vacheron Constantin’s current offerings for ladies, which are mostly downsized or quartz versions of men’s watches, as well as pricey, high-jewellery timepieces. That also sets it apart from its namesake, introduced in 2003 with a tonneau case, which lasted several years in the catalogue but never quite took off. Inspired by haute couture according to Vacheron Constantin, the new Égérie line is centred on two models, with either a moon phase or date. Each is offered in pink gold or steel, as well as a fully diamond-set version in white gold, for a total of five models. Égérie Self-Winding (top row), and Égérie Moonphase All models share a fully polished case with a diamond-set bezel, with a silver opaline dial featuring an offset sub-dial at two o’clock that sits just beside the crown, topped with a moonstone cabochon. The dials are decorated with a pleated, radial guilloche done the traditional way, with a hand-operated rose engine. The engine-turning is intersected up by a chapter ring with spherical markings for the minutes and applied gold hour numerals. Specially designed for the collection, the numerals are a modern take on traditional Breguet numerals...

Uncommon Longevity – The Story of Golay Fils & Stahl of Geneva SJX Watches
Vacheron Constantin producing or retailing highly Feb 17, 2020

Uncommon Longevity – The Story of Golay Fils & Stahl of Geneva

Auction catalogues often offer early 20th century pocket watches of impressive, refined quality that bear the names of unfamiliar Geneva firms. Amongst the most prominent are Agassiz, Ed. Koehn, Haas Neveux, and Touchon. Despite their obscurity now, these brands were once amongst the best in the world – arguably the equals of Patek Philippe or Vacheron Constantin, producing or retailing highly complicated and extra-thin timepieces. All of them, save for one, are now defunct and long forgotten. In fact, most went under long before the Quartz Crisis. A single name has survived and prospered while remaining a family business, by evolving its business over the centuries – Golay Fils & Stahl. A familiar name As an avid reader of auction catalogues, I had come across Golay Fils & Stahl on several occasions, and the name stayed with me because of the high quality of firm’s pocket watches (Haas Neveux being another). Then in November 2019, Phillips sold the Patek Philippe ref. 3652 minute-repeating wristwatch. Not only was the watch relatively recent, having been made in 1985, it was a unique reference powered by a reworked vintage movement – and signed “Golay Fils & Stahl” on the dial. Few retailers get their name on modern Patek Philippe watches, let alone a one-off, custom timepiece. It piqued my curiosity. The ref. 3652 – essentially a Calatrava ref. 96 minute repeater By sheer chance that curiosity was satisfied when Melissa Wolfgang Amenc got in touch after see...

Seiko Introduces the Presage Prestige Crown-Chronograph Remake SJX Watches
Seiko Introduces Feb 17, 2020

Seiko Introduces the Presage Prestige Crown-Chronograph Remake

Having unveiled the vintage-inspired Presage Automatic Chronograph ref. SRQ031 in October 2019, Seiko has returned to the same historical wristwatch with the Presage Prestige 2020. Comprising of three variants – SPB127J1, SPB131J1, and SPB129J1 – the new Presage is once again modelled on the “Crown” chronograph ref. 5719A-45899 that was unveiled in 1964 to mark that year’s Tokyo Olympics. The vintage original was a mono-pusher chronograph with basic functionality, featuring a central, elapsed seconds hand and black plastic bidirectional bezel for recording times of over a minute. Last year’s Presage chronograph was a step up from the original with three counters, but this year’s Presage Prestige does away with the chronograph altogether. But since the original had a plain dial without registers, the new Presage Prestige manages to look pretty much the same. The original “Crown” chronograph from 1964 All three versions of the Presage Prestige differ only in dial colour, and are otherwise identical in terms of dimensions, design and movement. Because of the styling of the “Crown” Chronograph, the Presage Prestige manages to be fairly faithful to the original. Nearly all of the elements of the dial, from the chapter ring with the applied hour markers and oblong “lume” plots to the dauphine hands, are a close-enough replica of the original. Granted it has been modernised with the usual tweaks found in remakes, including a slightly larger case and ...

Sinn Introduces the 158 Chronograph “Bund Remake” SJX Watches
TAG Heuer Because Feb 14, 2020

Sinn Introduces the 158 Chronograph “Bund Remake”

The new Sinn 158 is unusual in being a remake of a vintage watch originally produced by another company, but due to a quirk of history, simultaneously a Sinn. In the 1960s and 1970s Heuer supplied the German armed forces, or Bundeswehr, with the 1550 SG flyback chronograph. Though typically military in style, the Heuer 1550 SG was fairly distinctive, with a black-coated rotating bezel and oversized sub-dials. A favourite remake In the 1980s, Sinn was contracted by the Bundeswehr to refurbish the 1550 SG watches, resulting in some having a Sinn-branded dial. At the same time, decommissioned or surplus watches were also acquired by Sinn, which then sold them to civilians. Having become something of a cult favourite due to its design, size, and affordability, the Heuer 1550 SG has been the subject of several past remakes by Sinn. Named the Sinn 155, the earliest remake was for the Japanese market in 2007, and later editions included a 155 for German department store Manufactum. A Heuer 1550 SG “Bund” from the 1970s. Photo – TAG Heuer Because of its hands, the 158 is the most modern-looking of the remakes, but still retains all of the key elements of the original, most notably the four screws to secure the inner case to the outer case, as well as the flat step where the lugs meet the bezel. Like the original, the 158 has a bead-blasted steel case with a bidirectional, black-coated aluminium bezel. The case is 43 mm like the 1550 SG, but slightly thicker at 15.15 mm high ...